|
|
|
|
|
|
|
|
|
MMR8 Playback Timecode Chase Quick Set Up
Selecting menu items:
To access menu items
Press the SETUP button.
Scroll through selections with the jog wheel.
To change menu item parameters, press the TRIM button, and scroll through the selections with the jog wheel.
When desired selection is displayed press STO button.
An asterisk in front of a parameter indicates the current selection.
Set Up:
Single machine:
Set to timecode chase (menu 000)
Select desired clock source (menu 002)
Select desired timecode frame rate (menu 003).
Proceed to OPEN PROJECT.
Set Up:
Multiple Machines:
Connect sync cables on back of machines, daisy chaining all machines through 'sync in' and 'sync out' ports.
Set master machine to timecode chase (menu 000)
Select desired timecode frame rate (menu 003)
Set machine as MMR master (menu 110).
Assign ID number (menu 111), probably number 1 for master machine.
Set all other machines as MMR slaves (menu 110), and assign ID numbers (menu 111). Do not duplicate ID numbers within the chain.
Set control to local/MMR (menu 000), frame reference (menu 001) to automatic, and sample reference (menu 002) to automatic on all slave machines.
Open project/load tracks:
Be certain that the drive is mounted. Mount drive by pressing the STOP transport key.
To load an entire project, press LOAD TRACK button, scroll to desired project using jog wheel, press STO button.
To load individual tracks, press LOAD TRACK button twice, scroll through available tracks, press STO to load desired track. Repeat until all desired tracks are loaded.
Press LOAD TRACK button again to return to normal display.
And they're off!
To put machines into chase, press ON LINE button.
DANGER WILL ROBINSON!!
ALWAYS UNMOUNT A DRIVE AND ALLOW SEVERAL SECONDS FOR DRIVE TO SPIN DOWN BEFORE REMOVING IT!
|
|
|
|
|
|
|
|
|
